⚛️ Physics: Units, Instruments & Facts भौतिकी: मात्रक, उपकरण व तथ्य
326 exam-ready facts · 324 MCQs
-
321
The Doppler effect depends on relative motion; if source and listener move at the same speed and direction, frequency remains unchanged.
No change in relative distance means no shift in the perceived frequency of the wave.
Asked in SSC CGL 2025 (23 Sep, Shift 1)
Practice (1)
Q321What happens to the perceived frequency when both the source and the listener move with the same speed in the same direction?
Show answer
Correct answer: C — It remains unchanged
Answer: (C)The Doppler effect depends on relative motion between source and listener, not on how fast each moves over the ground.
Same speed, same direction: the gap between them never changes.
Source behind the listener, both at speed u through still air (speed of sound v):
f′ = f × (v − u)⁄(v − u) = fThe perceived frequency equals the source's own frequency → option (c).
Why the others are wrong(a)It increases: It increases only when the gap is closing, with source and listener approaching. Moving together at the same speed, the gap never shrinks.(b)It decreases: It decreases only when the gap is growing, with source and listener moving apart. Here neither pulls away from the other.(d)It fluctuates rapidly: Fluctuation would need the relative speed to keep changing. Both speeds are equal and steady, so the heard frequency is steady too, and equal to the source's. -
322
Nichrome is used as heating elements due to its high electrical resistivity and high melting point.
Alloys like nichrome do not oxidize easily at high working temperatures, ensuring durability.
Asked in SSC CGL 2025 (21 Sep, Shift 3)
Practice (1)
Q322Why is nichrome commonly used as the heating element in electric heaters?
Show answer
Correct answer: C — It offers high resistivity and a high melting point
Answer: (C)A heating element must turn current into heat and survive being red-hot.
High resistivity gives it enough resistance in a short, sturdy coil, so it produces most of the circuit's heat (H = I²Rt).
A high melting point, about 1,400 °C for nichrome, keeps it from melting at working temperature.NCERT adds that alloys do not oxidise readily at high temperatures, which is why heaters use them. Option (c).
Why the others are wrong(a)It has low resistivity and a high melting point: Low resistivity is what the copper cord needs, so it stays cool. An element made that way would need a very long, thin wire to reach the resistance a heater needs.(b)It has high resistivity and a low melting point: A low melting point suits a fuse, which NCERT describes as a wire that melts and breaks the circuit when the current is too high. A heating element must glow without melting.(d)It offers low resistivity and a low melting point: This fails on both counts: low resistivity gives little heat from a short wire at a given current, and a low melting point would let the element fail once hot. -
323
At least two reflected rays are required to locate the image formed by a spherical mirror.
The intersection point of minimum two reflected rays defines the precise position of the image.
Asked in SSC CGL 2025 (24 Sep, Shift 2)
Practice (1)
Q323The minimum number of rays required to locate the image formed by a spherical mirror is ______.
Show answer
Correct answer: B — Two
Answer: (B)Each point of an object sends out countless rays, but you need just two. The image of a point forms where two reflected rays intersect, or appear to meet behind the mirror.
NCERT's Class 10 text says it directly: 'The intersection of at least two reflected rays give the position of image of the point object.' → option (b).
Why the others are wrong(a)One: A single reflected ray fixes only a line. The image lies somewhere along it, and without a second ray crossing it you cannot say where.(c)Three: A third ray is a useful check that the diagram is drawn right, but it is not needed. Two rays already cross at the image point.(d)Four: Four is the number of convenient rays NCERT describes: parallel to the axis, through the focus, through the centre of curvature, and at the pole. You choose any two of them. -
324
The audible frequency range for a normal human ear is approximately 20 Hz to 20,000 Hz.
Frequencies below this range are called infrasound and those above are termed ultrasound.
Asked in SSC CGL 2025 (23 Sep, Shift 3)
Practice (1)
Q324What is the audible frequency range for the human ear?
Show answer
Correct answer: B — 20–20,000 Hz
Answer: (B)The human ear hears sound from about 20 Hz to 20,000 Hz, that is 20 Hz to 20 kHz.
Below 20 Hz lies infrasound and above 20 kHz lies ultrasound. Neither is audible to us.
The band 20–20,000 Hz is the one that matches both limits → option (b).
Why the others are wrong(a)0–10000 Hz: The range does not start at 0 Hz. Frequencies below 20 Hz are infrasound, which we cannot hear. The 10,000 Hz ceiling also drops the audible band from 10 to 20 kHz.(c)2 kHz–20 kHz: The lower limit is 20 Hz, not 2 kHz. This range wrongly leaves out the whole band from 20 Hz to 2,000 Hz, all of which the ear hears.(d)100–1000 Hz: 100–1000 Hz is far too narrow. It leaves out the audible band from 20 to 100 Hz and everything from 1 kHz up to 20 kHz. -
325
The frictional force exerted by fluids is known as drag.
-
326
The minimum temperature at which a solid melts to become liquid at atmospheric pressure is called the melting point.