🔬 General Science सामान्य विज्ञान
1407 exam-ready facts · 1382 MCQs
-
1301
Electrical energy consumption is calculated in kilowatt-hours (kWh), where 1 kWh equals 1 unit of electricity.
Multiplying appliance power in kilowatts by total operating hours gives energy consumed in units.
Asked in SSC CGL 2025 (20 Sep, Shift 1)
Practice (1)
Q1293A 60 W electric lamp is used for 5 hours daily. Calculate the energy consumed in 'units' (kilowatt-hours) in 30 days.
Show answer
Correct answer: A — 9 units
Answer: (A)Convert the lamp's power to kilowatts, then multiply by the hours of use.
Power = 60 W ÷ 1,000 = 0.06 kW
Why the others are wrong(b)30 units: 30 units would need 1 kWh a day, which is a 200 W lamp run for 5 hours. A 60 W lamp uses only 0.3 kWh a day.(c)0.3 units: 0.3 units is the energy for one day. The question asks for 30 days, so it still has to be multiplied by 30.(d)90 units: 90 units is ten times the answer. It comes from dividing 9,000 Wh by 100 instead of 1,000 when converting watt-hours to kilowatt-hours.
Energy per day = 0.06 kW × 5 h = 0.3 kWh
Energy in 30 days = 0.3 × 30 = 9 kWh
1 unit = 1 kWh, so the lamp uses 9 units → option (a) -
1302
A sphygmomanometer is used to measure which of the following? — lood pressure
-
1303
Liquid helium is used as a cooling medium for the Large Hadron Collider (LHC) and superconducting magnets in MRI scanners and NMR spectrometers.
Helium has an extremely low boiling point of about 4.2 Kelvin.
Asked in SSC CGL 2023 (21 Jul, Shift 2)
Practice (1)
Q1294Which of the following is used as a cooling medium for the Large Hadron Collider (LHC) and the superconducting magnets in MRI scanners and NMR spectrometers?
Show answer
Correct answer: D — Helium
Answer: (D)
Liquid helium cools the superconducting magnets of the LHC and MRI/NMR machines. -
1304
When is the Indian Armed Forces Veterans Day observed annually ? — 14 January
-
1305
The Doppler effect depends on relative motion; if source and listener move at the same speed and direction, frequency remains unchanged.
No change in relative distance means no shift in the perceived frequency of the wave.
Asked in SSC CGL 2025 (23 Sep, Shift 1)
Practice (1)
Q1295What happens to the perceived frequency when both the source and the listener move with the same speed in the same direction?
Show answer
Correct answer: C — It remains unchanged
Answer: (C)The Doppler effect depends on relative motion between source and listener, not on how fast each moves over the ground.
Same speed, same direction: the gap between them never changes.
Source behind the listener, both at speed u through still air (speed of sound v):
f′ = f × (v − u)⁄(v − u) = fThe perceived frequency equals the source's own frequency → option (c).
Why the others are wrong(a)It increases: It increases only when the gap is closing, with source and listener approaching. Moving together at the same speed, the gap never shrinks.(b)It decreases: It decreases only when the gap is growing, with source and listener moving apart. Here neither pulls away from the other.(d)It fluctuates rapidly: Fluctuation would need the relative speed to keep changing. Both speeds are equal and steady, so the heard frequency is steady too, and equal to the source's. -
1306
Group-16 elements of the periodic table, also known as the oxygen family, are called chalcogens or ore-forming elements.
Most ores of copper and other metals are oxides or sulfides.
Asked in SSC CGL 2023 (21 Jul, Shift 3)
Practice (1)
Q1296Which of the following group elements are called chalcogens?
Show answer
Correct answer: A — Group-16
Answer: (A)
Group-16 elements (oxygen family) are called chalcogens. -
1307
Nichrome is used as heating elements due to its high electrical resistivity and high melting point.
Alloys like nichrome do not oxidize easily at high working temperatures, ensuring durability.
Asked in SSC CGL 2025 (21 Sep, Shift 3)
Practice (1)
Q1297Why is nichrome commonly used as the heating element in electric heaters?
Show answer
Correct answer: C — It offers high resistivity and a high melting point
Answer: (C)A heating element must turn current into heat and survive being red-hot.
High resistivity gives it enough resistance in a short, sturdy coil, so it produces most of the circuit's heat (H = I²Rt).
A high melting point, about 1,400 °C for nichrome, keeps it from melting at working temperature.NCERT adds that alloys do not oxidise readily at high temperatures, which is why heaters use them. Option (c).
Why the others are wrong(a)It has low resistivity and a high melting point: Low resistivity is what the copper cord needs, so it stays cool. An element made that way would need a very long, thin wire to reach the resistance a heater needs.(b)It has high resistivity and a low melting point: A low melting point suits a fuse, which NCERT describes as a wire that melts and breaks the circuit when the current is too high. A heating element must glow without melting.(d)It offers low resistivity and a low melting point: This fails on both counts: low resistivity gives little heat from a short wire at a given current, and a low melting point would let the element fail once hot. -
1308
Which process is used by the unicellular freshwater organisms and most plant cells to take in water? — Osmosis
-
1309
At least two reflected rays are required to locate the image formed by a spherical mirror.
The intersection point of minimum two reflected rays defines the precise position of the image.
Asked in SSC CGL 2025 (24 Sep, Shift 2)
Practice (1)
Q1298The minimum number of rays required to locate the image formed by a spherical mirror is ______.
Show answer
Correct answer: B — Two
Answer: (B)Each point of an object sends out countless rays, but you need just two. The image of a point forms where two reflected rays intersect, or appear to meet behind the mirror.
NCERT's Class 10 text says it directly: 'The intersection of at least two reflected rays give the position of image of the point object.' → option (b).
Why the others are wrong(a)One: A single reflected ray fixes only a line. The image lies somewhere along it, and without a second ray crossing it you cannot say where.(c)Three: A third ray is a useful check that the diagram is drawn right, but it is not needed. Two rays already cross at the image point.(d)Four: Four is the number of convenient rays NCERT describes: parallel to the axis, through the focus, through the centre of curvature, and at the pole. You choose any two of them. -
1310
Which scientist among the following coined the term ‘protoplasm’ for the fluid substance of the cell? — Purkinje
-
1311
Oleic acid is a monounsaturated fatty acid that makes up 55-80% of olive oil, making it suitable for cooking.
It is widely found in animal and vegetable fats.
Asked in SSC CGL 2023 (21 Jul, Shift 3)
Practice (1)
Q1299Which of the following acids makes up 55-80% of olive oil, making it a good choice for most cooking methods?
Show answer
Correct answer: B — Oleic acid
Answer: (B)
Oleic acid makes up about 55–80% of olive oil. -
1312
Which of the following is a conventional source of energy? — Firewood
-
1313
Mendelevium is a synthetic radioactive metallic element with atomic number 101 belonging to the actinide series, discovered in 1955.
It was named in honor of Dmitri Mendeleev.
Asked in SSC CGL 2023 (21 Jul, Shift 4)
Practice (1)
Q1300What is the name of a metallic radioactive transuranic element with atomic number 101 in the actinide series, discovered in 1955?
Show answer
Correct answer: C — Mendelevium
Answer: (C)
Mendelevium (Md, Z = 101) was discovered in 1955. -
1314
The audible frequency range for a normal human ear is approximately 20 Hz to 20,000 Hz.
Frequencies below this range are called infrasound and those above are termed ultrasound.
Asked in SSC CGL 2025 (23 Sep, Shift 3)
Practice (1)
Q1301What is the audible frequency range for the human ear?
Show answer
Correct answer: B — 20–20,000 Hz
Answer: (B)The human ear hears sound from about 20 Hz to 20,000 Hz, that is 20 Hz to 20 kHz.
Below 20 Hz lies infrasound and above 20 kHz lies ultrasound. Neither is audible to us.
The band 20–20,000 Hz is the one that matches both limits → option (b).
Why the others are wrong(a)0–10000 Hz: The range does not start at 0 Hz. Frequencies below 20 Hz are infrasound, which we cannot hear. The 10,000 Hz ceiling also drops the audible band from 10 to 20 kHz.(c)2 kHz–20 kHz: The lower limit is 20 Hz, not 2 kHz. This range wrongly leaves out the whole band from 20 Hz to 2,000 Hz, all of which the ear hears.(d)100–1000 Hz: 100–1000 Hz is far too narrow. It leaves out the audible band from 20 to 100 Hz and everything from 1 kHz up to 20 kHz. -
1315
The property of metals to produce ringing sound on being struck with a hard object is known as ________. — Sonorous
-
1316
The frictional force exerted by fluids is known as drag.
-
1317
John Dalton proposed in the early 1800s that each chemical element is composed of unique atoms that differ by their mass.
His atomic theory laid the foundation for modern chemistry.
Asked in SSC CGL 2023 (24 Jul, Shift 1)
Practice (1)
Q1302In the early 1800s, who discovered that each chemical element is made up of a unique type of atom and that atoms differ by their mass?
Show answer
Correct answer: B — John Dalton
Answer: (B)
John Dalton's atomic theory (early 1800s) said each element is made of unique atoms differing in mass. -
1318
Which of the following is a term used for species that are not natural residents of the local habitat, but are included in this system? — Exotic
-
1319
The minimum temperature at which a solid melts to become liquid at atmospheric pressure is called the melting point.
-
1320
Vladimir Prelog received the 1975 Nobel Prize in Chemistry for his research in the stereochemistry of organic molecules and reactions.
Stereochemistry deals with the three-dimensional spatial arrangement of atoms.
Asked in SSC CGL 2023 (24 Jul, Shift 2)
Practice (1)
Q1303Who received the Nobel Prize ‘for his research in the stereochemistry of organic molecules and reactions’ in 1975?
Show answer
Correct answer: A — Vladimir Prelog
Answer: (A)
Vladimir Prelog shared the 1975 Chemistry Nobel for the stereochemistry of organic molecules and reactions.