SF Prep
14 Physics Notes 🕒 Updated 2026-10-29
Page 1
Rotational Motion

Rotational Motion

1. Rigid Body

  • Collection of particles with fixed distances between them (ideal: does not deform).
  • Velocities of any two particles along their joining line are equal: V₁ cos α = V₂ cos β.
  • Angular velocity ω→ of a rigid body is the same about every point (∥ axis).
  • General plane motion = translation of COM + rotation about COM (or about an instantaneous axis).

2. Types of Motion (L01)

  • Pure translation: every particle has the same s→, v→, a→.
s→
  • Pure rotation: about a fixed axis; every particle moves in a circle about that axis; θ, ω, α same for all.
  • Combined: e.g. wheel of a moving vehicle — COM translates with v, body rotates with ω.
v ω contact

3. Angular Displacement & Velocity

θ (radian) = sr  ;  ω = dθdt  ;  α = dωdt
ω = 2πT = 2πf  (uniform circular / steady rotation)
  • Point at distance r from axis: s = rθ  ;  v = rω  ;  at = rα  ;  ac = rω² = v²/r
  • Examples: ωsecond hand = 2π/60 rad/s; ωEarth (spin) = 2π rad/day; about Sun = 2π/365 rad/day.
θ R v ac at=αR, ac=ω²R

4. Kinematics (constant α)

ω = ω₀ + αt
θ = ω₀t + ½ αt²
ω² = ω₀² + 2αθ
  • Same form as linear: s→θ, v→ω, a→α.

5. Rigid-Body Constraint

  • Length of a rigid rod fixed ⇒ components of end velocities along the rod are equal.
  • Rod AB: end A on floor (vA horizontal), B on wall (vB vertical), angle with floor = θ:
vA cos θ = vB sin θ  ⇒  vB = vA cot θ
A B vA vB θ

6. Moment of Inertia (I)

  • Measure of rotational inertia about an axis. Always ≥ 0; depends on mass and its distribution; additive: I = I₁ + I₂ + …
I = ∑ mᵢ rᵢ² = ∫ r² dm

r = perpendicular distance from the axis.

m R axis

7. Standard I (about COM / symmetry axis)

BodyI
Ring / hoop / arc (centre ⊥ plane)MR²
Ring (about diameter)½ MR²
Ring (tangent ∥ diameter)3/2 MR²
Ring (rim, ⊥ plane)2 MR²
Disc / sector / solid cylinder (axis)½ MR²
Disc (about diameter)¼ MR²
Disc (tangent ∥ diameter)5/4 MR²
Disc (rim, ⊥ plane)3/2 MR²
Hollow thin cylinder / pipe (axis)MR²
Hollow pipe (central diameter)MR²/2 + ML²/12
Hollow pipe (diameter at end)MR²/2 + ML²/3
Annular disc (R₁, R₂ about axis)½ M(R₁²+R₂²)
Thin rod (centre ⊥ length)ML²/12
Thin rod (end ⊥ length)ML²/3
Thin rod (own longitudinal axis)≈ 0
Rectangular plate a×b (⊥ centre)M(a²+b²)/12
Rectangular plate (in-plane, ∥ side a, through centre)Mb²/12
Rectangular plate (about that edge)Mb²/3
Square plate side a (⊥ centre)Ma²/6
Square plate (in-plane through centre)Ma²/12
Cuboid a×b×c (axis ∥ c through centre)M(a²+b²)/12
Triangular plate (⊥ plane)(M/3)(a²+b²+c²)
Solid sphere (diameter)⅖ MR²
Solid sphere (tangent)7/5 MR²
Hollow thin sphere (diameter)⅔ MR²
Hollow sphere (tangent)5/3 MR²
Solid cylinder (central diameter)¼ MR² + ML²/12
Solid cylinder (diameter at end)¼ MR² + ML²/3
Solid cone (symmetry axis)3/10 MR²
Hollow cone (symmetry axis)½ MR²

Triangular plate: a, b, c = ⊥ distances of the axis from the midpoints of the three sides. Annular disc of mass M: I = ½ M(R₁²+R₂²) (limits: R₁→0 → disc; R₁→R₂ → ring).

ring ⊥ MR²
disc ⊥ ½ MR²
R₁ R₂ annular ½M(R₁²+R₂²)

8. Radius of Gyration (k)

I = Mk²  ⇒  k = √(I/M)
  • Distance where entire mass may be assumed for that I. Often write Icm = c M R² with c = k²/R².
Page 2
Rotational Motion

9. Perpendicular Axis Theorem

  • Strictly for planar (2-D) lamina in the x–y plane; x, y, z mutually perpendicular:
Iz = Ix + Iy

Ix, Iy = axes in the plane; Iz ⊥ plane, through the same point. Iz = ∫(x²+y²) dm.

x y z Iz=Ix+Iy dm
  • Example: ring — Iz = MR² ⇒ Ix = Iy = ½ MR² (about diameter).
  • Disc: Iz = ½ MR² ⇒ about diameter I = ¼ MR².

10. Parallel Axis Theorem

I = Icm + Md²

d = distance between parallel axes; one through COM. Valid for 1-D, 2-D and 3-D bodies.

CM d Icm I
  • If two parallel axes are at distances a and b from COM: I₂ − I₁ = M(b² − a²).
  • Triangular lamina, axis ⊥ to its plane: I = (M/3)(a²+b²+c²), where a, b, c are the perpendicular distances of that axis from the midpoints of the three sides.
Ex. Rod length L, I about end ⊥ to length.
Sol. Icm = ML²/12, d = L/2 ⇒ I = ML²/12 + M(L/2)² = ML²/3.

11. Torque (τ)

τ→ = r→ × F→  ;  τ = r F sinθ = r⊥ F = r F⊥
O P r F r⊥ τ = r⊥ F (lever arm)
  • SI unit: N·m. Direction by right-hand rule. Compute with determinant of unit vectors, r, F.
  • Torque about an axis = component of τ→ along that axis (e.g. τx = τ · î).
  • Force ∥ axis, or line of force through the axis ⇒ τaxis = 0.
τext = I α  (about fixed axis / about COM for rigid body)

12. Angular Momentum (L)

L→ = r→ × p→ = m (r→ × v→)  ;  rigid body fixed axis: L = Iω
τext = dL/dt
  • If τext = 0 ⇒ L conserved.
  • L about an axis = component of L→ along that axis. Particle moving ∥ to an axis ⇒ L about that axis can be zero.
  • Ex.: mass m at (a,b,0), velocity V î ⇒ L = −m V b k̂ (about origin); Lx = Ly = 0.

13. Rotational KE

Krot = ½ I ω²
  • Total KE of rigid body = ½ M vcm² + ½ Icm ω²
  • Fixed-axis rotation: K = ½ Iaxis ω² (= ∑ ½ mᵢ vᵢ²).

14. Work & Power (rotation)

W = ∫ τ dθ  ;  P = τ ω

15. Rolling Without Slipping

vcm = R ω  ;  acm = R α  (fixed surface: contact point velocity and acceleration along the surface are 0)
ground v ω 2v v+ωR A: v−ωR=0
Moving surface, speed v₁ along the surface: vcm − ω R = v₁  ;  acm − α R = a₁

Same sign rule on both: ωR (and αR) is the velocity (acceleration) of the contact point due to rotation, opposite to vcm when the body rolls to the right.

  • Write Icm = c M R² (c = k²/R²). Then R.K.E. = c × T.K.E.
  • Top of wheel: speed 2v; bottom (contact): 0; IAOR = contact point.
K = ½ Mv² + ½ Iω² = ½ (1+c) M v²
  • Dynamics (inertial frame): Fext = M acm and τcm = Icm α.
  • Horizontal force F at height h above COM (disc etc.): friction = 0 for pure rolling if h = c R (= k²/R). Disc: h = R/2.
  • If F through COM: friction backward (to create α). If F at top and αR too large: friction may act forward.
Page 3
Rotational Motion

16. Acceleration on Incline (rolling)

a = g sinθ1 + I/(MR²) = g sinθ1 + c = g sinθ1 + k²/R²
mg sinθ fr N α θ
  • Smaller c = k²/R² → larger a (sphere beats hoop).
  • Friction for pure rolling acts up the plane (whether going down or projected up).
Bodyc = k²/R²a / (g sinθ)
Solid sphere2/55/7
Disc / solid cylinder1/22/3
Hollow sphere2/33/5
Ring / hoop / hollow cylinder11/2

17. Friction Needed for Pure Rolling

f = c1+c Mg sinθ  =  Mg sinθ1 + R²/k²
μmin = c tanθ1+c  ;  α = g sinθ(1+c) R
  • Pure rolling continues only if f ≤ μ N, i.e. μ ≥ μmin.
  • aRing < ahs < adisc < ass  ;  f and t reverse that order.
  • Released from rest, drops through height h (static friction, energy conserved):
v² = 2 g h1+c  ;  KEtrans = mgh1+c  ;  KErot = c mgh1+c
  • Ring (c=1): TKE = RKE = mgh/2. Disc (c=½): TKE = 2mgh/3, RKE = mgh/3.
  • Time over distance S: t = √(2S/a) = √[2(1+c)h /(g sin²θ)] if height h.

18. Angular Impulse

∫ τ dt = ΔL

19. Types of Motion (summary)

  • Pure translation: every point has same velocity; no rotation.
  • Pure rotation: about a fixed axis; points move in circles about that axis.
  • General plane motion: translation of COM + rotation about COM (or about an instantaneous axis).

20. Rotational Equilibrium

  • For a body not starting to rotate (or rotating at constant ω):
∑ τ = 0  (about any convenient point)  and usually  ∑ F = 0
  • Choose pivot to eliminate unknown forces (e.g. hinge).
  • Couple: two equal opposite forces, τ = Force × perpendicular separation; net force = 0.

21. Fixed-Axis Rotation

  • Axis fixed in inertial frame (hinge, axle).
τaxis = Iaxis α  ;  Laxis = Iaxis ω
  • Hinge can exert force but its torque about the axis is zero if the force passes through the axis.
  • Both τhinge = Ihinge α and τcm = Icm α are true. Do not pair I of one point with τ about another.
  • String does not slip on a pulley: v = ωR and a = αR. Atwood with pulley I:
a = (m₁ − m₂) gm₁ + m₂ + I/R²  (m₁ > m₂)
I m₁ m₂

22. Instantaneous Axis of Rotation (IAOR)

  • For plane motion, there is a point (instantaneously at rest) about which the body is in pure rotation at that instant.
  • Rolling without slipping: IAOR is the contact point with the ground.
vcm = ω · (distance of COM from IAOR)
K = ½ IIAOR ω²  (= ½ Mvcm² + ½ Icm ω²)

23. Moving-Axis / General Rotation

  • Use: Fext = M acm and τcm = Icm α (torque about COM), or τ about a fixed point / IAOR when valid.
  • Angular momentum about a point O: LO = Lcm + rcm × M vcm.

24. Slipping → Pure Rolling

  • On rough horizontal: friction f = μN or static as needed; provides torque till v = Rω.
  • Horizontal rough: friction opposes velocity of contact point; f = μmg (kinetic) until v = Rω.
  • For body given u₀ (forward), ω₀ = 0: friction back ⇒ slows COM, speeds up ω.
v = u₀ − μ g t  ;  ω = (μ mg R / I) t  until  v = Rω
t = u₀μg(1 + MR²/I)  (ω₀ = 0 case)
  • Angular momentum about ground contact often conserved (friction torque about contact = 0).
Ex. Disc given u₀, ω₀ = 0 on rough horizontal. Find v when pure rolling starts.
Sol. About contact: L conserved. Mu₀ R = MvR + (½ MR²)(v/R) ⇒ v = (2/3) u₀.

25. Toppling

  • On accelerating truck / incline: topples if line of weight (mg) falls outside base, or τ about edge overturns.
  • For a block of base width b and COM height h: topples on horizontal accel. if a > g(b/2)/h = gb/(2h) (about the front edge).
CM b h ma mg edge topples if a > gb/(2h)

26. Conservation of L — Typical Uses

  • No external torque about a point ⇒ L about that point constant.
  • Ice skater / turntable; bullet + hinged rod/disc; disc dropped on rotating disc; beads sliding on a smooth rotating rod (I increases ⇒ ω decreases).
Iᵢ ωᵢ = I_f ω_f  (τext = 0 about axis)
Ex. Rod mass 4m, length L, spins with ω₀ about centre. Two beads mass m start at centre, slide to ends.
Sol. Iᵢ = (4m)L²/12 = mL²/3. I_f = mL²/3 + 2·m(L/2)² = mL²/3 + mL²/2 = 5mL²/6. ⇒ ω = (Iᵢ/I_f)ω₀ = (2/5)ω₀.

27. Quick Formula Revision

QuantityFormula
I∑mr² / ∫r² dm
Parallel axisIcm + Md²
Perpendicular axisIz = Ix + Iy
τIα = rF sinθ = r⊥F
LIω
Krot½ Iω²
Rollingv = Rω; K=½(1+c)Mv²
a on inclineg sinθ / (1 + c)
μminc tanθ / (1+c)
ω (period T)2π/T
v, at, acrω, rα, rω²
Ring diameter / annular½MR² / ½M(R₁²+R₂²)
Disc about diameterMR²/4
Topplinga > gb/(2h)

Key Points :

  • τext = 0 ⇒ L conserved (ice skater spins faster when arms in).
  • Rolling KE always > pure translation for same v.
  • On same incline, solid sphere reaches first (smallest c).
  • Parallel axis: axes must be parallel; one through COM.
  • Perpendicular axis: planar lamina only.