Page 1
Ray Optics
Ray Optics
Ray Optics & Optical Instruments
1. Basics
- In a homogeneous medium light travels in straight lines (rays). Reflection / refraction with Newton’s ray model.
- Regular reflection (smooth) → parallel beam; diffuse (rough) → scattered (objects visible).
2. Laws of Reflection & Deviation
- Incident, reflected, normal coplanar; i = r.
δ = π − 2i ; R̂ = Î − 2(ηN̂)N̂
- Normal incidence (i=0): ray retraces, δ=π. Grazing (i≈90°): δ≈0.
- Mirror rotated by θ ⇒ reflected ray turns by 2θ.
ωr = 2ωm − ωi (angular velocities of reflected ray, mirror, incident ray)
Two plane mirrors at angle θ: total deviation δ = 2θ (independent of incidence).
Images between mirrors: n = 360°/θ − 1 (even case; θ=90° → 3 images).
3. Plane Mirror — Image
v = −u (equidistant, opposite side)
- Real object → virtual erect image. Virtual object (converging incident) → real erect image.
- Mirror moves away by x (object fixed) ⇒ object–image separation increases by 2x.
- Field of view: observer must lie in the cone of rays reflected from mirror edges.
4. Sign Convention
- Pole / optical centre = origin. Incident-light side = negative; other side = positive (New Cartesian as used in these notes).
- Heights above axis +. Keep one convention for the whole problem.
5. Object & Image
- Object: intersection of incident rays (real if actual; virtual if extensions).
- Image: intersection of reflected/refracted rays (real → on screen; virtual → extensions).
6. Spherical Mirrors
- Concave: f negative (incident from left). Convex: f positive. f = R/2.
- Paraxial (i ≲ 5°): all parallel rays meet at F. Non-paraxial → spherical aberration (AP = R − R/(2 cos i)).
1v + 1u = 1f ; m = −v/u
Newton: x₁ x₂ = f² (distances of O,I from F with sign)
- Distant object size: d′ = f θ = f (d/D) (e.g. moon diameter on focal plane).
- Image velocity (rel. mirror): transverse vi⊥ = m vo⊥; axial vi∥ = −m² vo∥.
Page 2
Ray Optics
Ray Optics
7. Concave / Convex — Image Table
| Object (concave) | Image |
|---|---|
| at ∞ | at F, real, point |
| beyond C | F–C, real, inv., dim. |
| at C | at C, same size |
| C–F | beyond C, enlarged |
| at F | at ∞ |
| F–P | virtual, erect, enlarged |
- Convex: always virtual, erect, diminished (between P and F) for real object.
8. Refraction (Snell)
n₁ sin i = n₂ sin r ; sin i / sin r = n₂/n₁ = v₁/v₂ = λ₁/λ₂
- Frequency unchanged. Rarer→denser: toward normal, δ = i−r. Denser→rarer: away, δ = r−i.
- i=0 ⇒ r=0; i=90° into denser ⇒ r = C (critical from other side).
9. TIR & Circle of Illuminance
sin C = n₂/n₁ (n₁ > n₂) ; R = h tan C = n₂ h / √(n₁² − n₂²)
- Air above: R = h/√(n²−1). Optical fibre: repeated TIR in core.
- Cauchy: n = a + b/λ² ⇒ nV > nR ⇒ CR > CV (TIR harder for red).
10. Apparent Depth & Slab
dapp = (nobs/nmed) d ; air viewing denser: d/n
Multilayer (observer in air): d′ = Σ (hᵢ / nᵢ)
Normal shift (near-normal) = t (1 − 1/n) ; general: S = ℓ (1 − ns/n) along incident ray
Lateral shift = ℓ sin(i − r)cos r ; slab deviation = 0
Time to cross = n ℓc cos r
- ℓ = slab thickness. Normal shift is along the ray’s original line; lateral shift is sideways.
- Slab does not change magnification or transverse motion.
11. Refraction at Spherical Surface
n₂v − n₁u = n₂ − n₁R
m = (n₁/n₂)(v/u) ; longitudinal ℓ′ = (n₁/n₂)(v²/u²) ℓ
- Apply surface-by-surface for sphere / hemisphere (R sign: centre after surface along incident → +).
12. Thin Lens
1f = (n/ns − 1)(1R₁ − 1R₂)
Power in medium: P = ns/f (f in m, dioptre). Many JEE questions still write P = 1/f.
1v − 1u = 1f ; m = v/u (signs)
- Converging f>0 if n > ns for usual convex. Concave diverging if n > ns.
- Contact: 1/F = 1/f₁ + 1/f₂. Separated by d: 1/F = 1/f₁ + 1/f₂ − d/(f₁f₂).
- Displacement method (object–screen D>4f): f = (D² − d²)/(4D).
- Cut along the principal axis (two halves): each piece has the same f. Only the light collected is less.
- Cut perpendicular to the axis into two plano pieces. If the lens was symmetric, R₁ = R₂ = R, each piece has f′ = 2f.
1/f′ = (n − 1)(1/R) = ½ · (1/f) ⇒ f′ = 2f
Lens with different media on the two sides
- Do not use 1/v − 1/u = 1/f. Treat the lens as two spherical refractions. For a thin lens the image of the first surface is the object for the second.
- nᵢ = medium of the object, n = lens, nᵣ = medium on the image side. For a convex surface take R₁ and R₂ as positive radii.
nᵣv − nᵢu = n − nᵢR₁ + n − nᵣR₂
If nᵢ = nᵣ = nₛ this becomes the usual lens formula. Parallel rays (u → ∞): v is the focal length on the image side.
Page 3
Ray Optics
Ray Optics
13. Silvered Lens
1/Feq = 2/flens + 1/fmirror (light through lens twice + one reflection)
- Plane silvering: fm=∞ ⇒ F = f/2. Acts as converging mirror if lens converging.
- Final image at object ⇒ object at centre of curvature of equivalent mirror (rays retrace).
14. Prism
r₁ + r₂ = A ; δ = i + e − A
μ = sin[(A+δm)/2] / sin(A/2) (min. deviation)
At δm: i = e, r₁ = r₂ = A/2; for isosceles, ray ∥ base. δm = 2i − A
Thin prism: δ = (n/ns − 1)A ; in air δ = (n−1)A ; θ = (nv−nr)A
θ = (nv − nr) A ; ω = θ/δ = (nv−nr)/(ny−1)
ns sin imin = n sin(A − C) ; δmax = imin + 90° − A
- imin: grazing emergence (e = 90°, r₂ = C, r₁ = A − C). Ray emerges for every i only if A < 2C.
- ny ≈ (nv + nr)/2. Violet bends more than red. ω depends only on the material.
- Two thin prisms, second reversed: achromatic (deviation, no dispersion) if θ₁ = θ₂, i.e. (nv−nr)₁ A₁ = (nv−nr)₂ A₂.
- Direct vision (dispersion, no net deviation) if δ₁ = δ₂, i.e. (ny−1)₁ A₁ = (ny−1)₂ A₂.
15. Shadow (lamp + walker)
l = [h/(H−h)](a+vt) ; dl/dt = hv/(H−h)
- Tip speed VH = dl/dt + v of person.
16. Rainbow & Eye
- Primary rainbow: one reflection in the drop. Red ~42° from the antisolar line, violet ~40°. Red outside, violet inside.
- Secondary rainbow: two reflections; colours reversed and dimmer.
- Least distance of distinct vision D = 25 cm. Eye-lens to retina is fixed (~2.5 cm). Relaxed eye: R maximum, f maximum (distant object). Strained eye: R minimum, f minimum (near object).
- Myopia (near-sighted): far point at ℓ, image forms before the retina. Concave lens, f = −ℓ.
- Hypermetropia (far-sighted): near point at ℓ (> D). Convex lens, f = Dℓ/(ℓ − D) = 25ℓ/(ℓ − 25) with lengths in cm.
- Presbyopia: both near and far defects together.
- Astigmatism: cornea or lens not spherical; corrected by a cylindrical lens.
17. Simple & Compound Microscope
Simple: m = D/f (∞) ; 1+D/f (at D=25 cm)
Compound, image at ∞ (relaxed eye): m = Lf₀ · Dfe
Compound, image at D (stressed eye): m = v₀u₀ (1 + Dfe)
L = tube length = distance between the second focus of the objective and the first focus of the eyepiece. v₀/u₀ = h₂/h₁.
Compound microscope (image at ∞): rays leave eyepiece parallel.
18. Telescopes
Image at ∞ (relaxed): m = f₀/fe ; ℓ = f₀ + fe
Image at D (stressed): ue = fe Dfe + D ; m = f₀/ue ; ℓ = f₀ + ue
- Final image inverted. Reflecting: concave-mirror objective (no chromatic of objective).
Astronomical telescope, normal adjustment (image at ∞).
19. Quick Formula Revision
| Quantity | Formula |
|---|---|
| Mirror | 1/v+1/u=1/f; f=R/2; x₁x₂=f² |
| Lens | 1/v−1/u=1/f; P=ns/f |
| Snell / C | n₁sini=n₂sinr; sinC=n₂/n₁ |
| Illuminance | R=h tan C |
| Apparent depth | Σ hᵢ/nᵢ |
| Normal / lateral | t(1−1/n) ; ℓ sin(i−r)/cos r |
| Myopia / hypermetropia | f=−ℓ ; f=Dℓ/(ℓ−D) |
| Prism | μ from δm; ω=(nv−nr)/(ny−1) |
| Two mirrors | δ=2θ; n=360/θ−1; ωr=2ωm−ωi |
| Microscope / telescope | m=LD/(f₀fe) ; m=f₀/fe |
Key Points :
- Sign convention consistent for every numerical.
- Paraxial assumption → single focus; else aberration.
- TIR: denser→rarer and i>C; red hardest to TIR.
- Multiple surfaces / mirrors: chain images with new u each time.
- Different media on lens sides: never force 1/v−1/u=1/f.