Page 1
Electrostatic Potential
Electrostatic Potential
Electrostatic Potential
1. Potential and Field
ΔV = Vf − Vi = −∫ E · dr
E = −∇V
- In components: ΔV = −∫(Ex dx + Ey dy + Ez dz), and E = −(∂V/∂x î + ∂V/∂y ĵ + ∂V/∂z k̂).
- If V depends only on r and the field is radial: E = −(dV/dr) r̂, so ΔV = −∫ E dr along the outward radial direction.
- Potential is a scalar. Take charges with sign. For a point charge, V = 0 at infinity.
2. Work and Potential Energy
Welectric = −ΔU = −(Uf − Ui)
Wext = ΔU + ΔK ; moved slowly (ΔK = 0): Wext = ΔU = −Welectric
Two charges: U = k q1 q2 / r (with sign, U = 0 at r → ∞)
In a medium of dielectric constant εr: F = Fair/εr and U = k q1 q2 /(εr r).
Charge q in an external potential: U = qV (with sign) ; F = qE
- Electrostatic force is conservative, so energy is conserved when no non-conservative force acts.
- For several charges, add U = k qi qj / rij once for every pair.
3. Point Charge
E = kq/r² ; E = (kq/r²) r̂ ; V = kq/r
- k = 9 × 10⁹, ε0 = 8.85 × 10−12, and k = 1/(4πε0).
- +q: E outward, V positive. −q: E inward, V negative.
- Several point charges: V = Σ kqi/ri. Field is the vector sum.
4. Equipotential Surface
- Every point on it has the same V, so ΔV = 0 and E · dr = 0 along the surface. Field lines are perpendicular to it.
- Point charge: concentric spheres. Uniform field: planes perpendicular to E.
- No work is done in sliding a charge along an equipotential.
5. Uniform Field
ΔV = −E · s ; |ΔV| = Ed
- d is the displacement parallel to E. Potential falls in the direction of E.
- A path perpendicular to E has ΔV = 0.
6. Dipole Potential
V = k p cosθ / r² = k p · r̂ / r²
E = (kp/r³) √(1 + 3 cos²θ)
- Axial, on the side p points: E = 2kp/r³, V = +kp/r². On the opposite side: E = 2kp/r³, V = −kp/r².
- Equatorial line: E = kp/r³ (antiparallel to p), V = 0.
- Field formulas are also on the Electric Charges and Fields page. θ is measured from the dipole axis.
Point charge on the axis of p: F = q(2kp/r³), U = q(kp/r²). On the equator: F = q(kp/r³), U = 0.
Two dipoles end to end, parallel: F = 6k p1 p2 / r⁴, U = −2k p1 p2 / r³.
One dipole along the line, the other perpendicular to it: F = 3k p1 p2 / r⁴, U = 0.
7. Pitch Balls
tanθ = kq² / [mg (2ℓ sinθ)²]
Hung in a liquid: tanθ = (Fair/εr) / [mg(1 − ρ/σ)]. ρ = density of the liquid, σ = density of the balls.
Page 2
Electrostatic Potential
Electrostatic Potential
Electrostatic Potential
8. Charged Arc (at the centre)
E = (2kλ/R) sin(θ/2) along the bisector
- θ is the angle at the centre, in radians for the potential below. Semicircle (θ = π): E = 2kλ/R. Quarter circle (θ = π/2): E = √2 kλ/R, along the bisector.
- Every bit of charge is at distance R, so V = kq/R = kλθ.
9. Charged Ring (on the axis)
E = kQx / (R² + x²)3/2 ; maximum at x = ± R/√2
V = kQ / √(R² + x²) ; maximum at x = 0
- At the centre E = 0 and V = kQ/R. Far away both look like a point charge.
- E is an odd function of x (direction along the axis). V is even; E = −dV/dx.
10. Charged Disc (on the axis)
E = (σ/(2ε0)) [ 1 − x/√(R²+x²) ] = (σ/(2ε0))(1 − cosθ) (x > 0)
V = (σ/(2ε0)) [ √(R²+x²) − |x| ]
- x is the distance from the centre along the axis. At the centre, E = σ/(2ε0) (away on each side) and V = σR/(2ε0).
- Ex jumps from −σ/(2ε0) to +σ/(2ε0) at x = 0. R → ∞ (infinite sheet): E → σ/(2ε0), constant.
11. Infinite Non-conducting Sheet
E = σ/(2ε0) (same on both sides, away from a + sheet)
|ΔV| = Ed = σd/(2ε0)
- E does not fall with distance. Only a potential difference between two points is meaningful.
12. Infinite Straight Wire
E = 2kλ/r ; E = (2kλ/r²) r
V2 − V1 = −2kλ ln(r2/r1)
- Absolute V cannot be set to 0 at infinity (V is logarithmic). Use the difference between two finite points.
- Wire along y: the perpendicular vector is x î + z k̂, and r = √(x²+z²).
- No single V(r) graph with V(∞) = 0; only ΔV between r1 and r2 is defined.
13. Finite Straight Wire
- Foot of the perpendicular from P is at distance r. α and β are the angles from that foot to the two ends.
E⊥ = (kλ/r)(sinα + sinβ)
E∥ = (kλ/r)(cosβ − cosα)
- On the perpendicular bisector, α = β, so E∥ = 0 and E = (2kλ/r) sinα, along the perpendicular.
- Infinite wire: α = β = 90°, so E = 2kλ/r.
- Use the two components above. Do not use a single “E = (2kλ/r) sin((α+β)/2)” as a general formula.
14. Long Cylinder
Hollow: outside E = 2kλ/r ; inside E = 0
Solid: outside E = 2kλ/r = ρR²/(2ε0 r) ; inside E = ρr/(2ε0)
- λ = charge per unit length. For a uniform solid cylinder λ = ρ π R². Outside, both look like a wire on the axis.
Page 3
Electrostatic Potential
Electrostatic Potential
Electrostatic Potential
15. Uniformly Charged Shell
Outside (r ≥ R): E = kQ/r² ; V = kQ/r
Inside (r < R): E = 0 ; V = kQ/R (constant)
- Same for a conducting sphere and a thin non-conducting shell. On the surface E = kQ/R² = σ/ε0 and V = kQ/R.
- E jumps from 0 to kQ/R² at r = R. V is continuous; flat inside, then falls as 1/r.
16. Uniform Solid Non-conducting Sphere
Outside: E = kQ/r² ; V = kQ/r
Inside: E = kQr/R³ = ρr/(3ε0) ; V = [kQ/(2R³)](3R² − r²)
Centre: E = 0 ; V = 3kQ/(2R)
- E rises linearly to kQ/R² at the surface, then falls as 1/r². V is maximum at the centre (3/2 of the surface value).
- If ρ = ρ0 rn (n ≠ −3), the field at radius r is E = ρ0 rn+1 / [(n+3)ε0]. Charge of the whole sphere is Q = 4π ρ0 Rn+3 / (n+3).
17. Spherical Cavity in a Uniform Sphere
E = ρ a / (3ε0) inside the cavity (uniform)
- a is the vector from the centre of the big sphere to the centre of the cavity. Direction is along that line, for ρ > 0.
18. Energy Stored in the Field
Energy density = ½ ε0 E² ; U = ∫ ½ ε0 E² dV
Shell, total self energy: U = kQ²/(2R) (all of it is outside; inside E = 0)
Solid sphere, total: U = 3kQ²/(5R)
- Solid sphere split: outside contribution kQ²/(2R), inside contribution kQ²/(10R).
- Electrostatic pressure on a charged surface: P = σ²/(2ε0). Force pulling the two halves of a shell apart: F = [σ²/(2ε0)] πR².
19. Conductor in Electrostatics
- E = 0 everywhere inside the material. The induced field cancels the external field.
- Field lines meet the surface at right angles. The whole conductor, surface and interior, is one equipotential: ΔV = −∫E·dr = 0.
- Excess charge sits only on surfaces. A solid conducting sphere is the same as a thin shell.
- Just outside, E = (σ/ε0) n̂.
Cavity: charge on the inner surface = −(charge inside the cavity)
- If the conductor’s total charge is Q and the cavity holds q, the inner surface is −q and the outer surface is Q+q. Start the distribution from the inner surface. The charge in the cavity is not part of the conductor.
- Shielding: the cavity charge together with the inner-surface charge −q gives zero field everywhere outside the cavity. Charges outside, together with the outer-surface charge, give zero field inside the cavity. A charge in the cavity feels no force from outside charges.
Conducting plate, charge Q, area A: each face has σ = Q/(2A), and outside E = σ/ε0 = Q/(2Aε0)
- A non-conducting sheet is one layer, σ = Q/A, E = σ/(2ε0). That is the same outside field, Q/(2Aε0).
20. Sharing and Earthing
- Two conductors joined by a wire share charge until their potentials are equal. Total charge is conserved.
- Isolated spheres: V = kq/R, so q1/R1 = q2/R2.
q1 = Q R1/(R1+R2) ; q2 = Q R2/(R1+R2)
- Earthed conductor: charge flows until its potential is zero. The final charge is whatever value makes V = 0; it is not zero in general.